CH
EN

49选7开奖历史记录:

PRODUCT CENTER
Product
PCB equipment
PCB Accessories

PIN high frequency f..

Equipment principle: High frequency fusion machine is the principle of electromagnetic induction heating, so that the fusion zone of each layer is uniform and at the same time, the semi - curing film (PP) The inner layer is fused together with the clamping force of the fusion head. PIN dual table positioning, high capacity, easy to operate; The high uniformity of heating, the thickness of the plate is not affected by the thickness of the plate (conventional plate thickness in the 12MM fusion effect is good); Energy saving can only be triggered after the heating and energy concentration, and the electrical heating can save energy about 60%-70%; Efficient fusion within the inner layer from outside to separate simultaneous heating without heat conduction is rapidly warming; Operation is simple and convenient fuse head number according to the customer demand configuration, not only to ensure that the binding force of large size full page and in the replacement of products of different size adjustment is very convenient; The plate surface and the pressing plate are formed by the combination of the special material design and the small volume energy concentration, so that the surface and the pressing plate are provided with narrow groove, thereby ensuring the product to be formed after lamination; And improve the material utilization rate according to the specific circumstances of narrow minimum edge can be design to about 5-6mm, and can design into the grid to prevent pressing sideslip fusion area is small. Board size: 12 "x 12" - 26 "x 30" Fusion thickness: 12 mm maximum, special configuration can also be large. Fusion of copper area: recommended for 5-8*22mm solid copper grid area or region Fusion time: Programmable Cooldown: Programmable

More

Single tower of copp..

Machine materials all use SUS304 stainless steel; Filtration capacity, can be treated wastewater 35 - 100L/min; The filtration effect is good, can handle more than 10 um of copper powder, filtered copper concentration was 10 ~ 50mg/L; Simple operation, the operation to remove the copper powder by only 10 - 15min; Easy to clean, the compressed air can be in the moment and make solid copper dehydration; Can match any brand grinding machine; Applicable process: internal / external D/F pre-treatment, PTH pre-treatment, S/M pre-treatment; Recycled water, save water, reduce cost; Automatic pressure alarm function, replace the filter bag to remind. Filter volume: 70~150L/35~100L/min Capacity: 35L/70L Power: 1.5KW/4.4KW Running weight: 300KG/390KG

More

High speed volcanic ..

According to customer's different process requirement, make the equipment and equipment capability to meet the production requirement; Combined design production speed: 4-5m/min production; Chinese operator interface, the program can be customized according to customer requirements; with human nature, friendly alarm display function, the specific issues at a glance, Party Timely maintenance; The machine has the function of automatically making the grinding marks, the touch screen sets the width of the grinding marks, and puts the board automatically to make the grinding marks; Machine is equipped with ENCODER automatically calculate the length of each board and board position, no need to enter the production board size, the same thickness of the production board With the size of the board can be directly cross; Machine with automatic / manual transfer function, optional automatic adjustment of the board, without manual operation; No plate automatic standby water saving function and abnormal detection device. Working width: 750mm Grinding board size: 650mm * 650mm (max) 250 mm * 250mm (min) Plate thickness: 0.1~3.2mm (option:12mm) Conveying speed: 0.0~5.0m/min

More

Horizontal chemical ..

According to customer's different process requirement, make the equipment and equipment capability to meet the production requirement; The cleaning process is suitable for various chemical processes; Remove the plate grease and impurity ion pollution; Chinese operator interface, the program can be customized according to customer requirements, with human nature, friendly alarm display function, the specific issues at a glance, Convenient operation and maintenance; Machine with automatic / manual transfer function, optional automatic adjustment of the board, without manual operation; No plate automatic standby water saving function and abnormal detection device. Working width: 750mm Grinding board size: 650mm * 650mm (max) 35 mm * 35mm (min) Plate thickness: 0.05~3.2mm (option:12mm) Conveying speed: 0.0~5.0m/min

More
ABOUT US
About us

Shenzhen Ching King Electronic Co.ltd . is a manufacturing, trading, marketing of an integrated company, we have been committed to providing quality PCB industry Equipment and related parts, repair, maintenance and technical support services. Have a good pre-sales technical support and design development, production, maintenance in one of the Professional team, with good equipment and processing conditions, self-development and improvement of a variety of high-performance machines, spare parts, we can use the professional advantages and comprehensive energy Force, to provide customers with new equipment, renovation, transformation and better services.
Equipment: Electromagnetic melt machine (CCD / PIN), PP automatic punching machine, copper drilling machine, PP cutting machine, 

More

NEWS CENTER
News
【company news】
[NULL]
2019-3-11
【company news】
[NULL]
2019-3-14
【company news】
[NULL]
2019-3-6
【company news】
Shenzhen Jing Jin Electronics Co., Ltd. ..
2016-8-4
【Show information】
Shenzhen ChingKing Electronics Co., Ltd.
2016-10-8
【Show information】
[NULL]
2019-3-2


WeChat


Weibo

Copyright © Shenzhen Ching King Electronic Co.ltd 粤ICP备08121982号
  • 肖华鑫拟提名为福建团省委书记候选人 2019-04-18
  • 猛龙正式任命新任主帅 50岁功勋助教成功上位 2019-04-18
  • TNF100 2013北京国际越野挑战赛胜利落下帷幕 2019-04-18
  • “让十九大精神口口相传” 2019-04-17
  • 回复@不能这样啊:瓜娃子啊!社交、尊重、自我实现能分配给你? 2019-04-17
  • 长城新媒体集团有限公司 采访设备采购公告 2019-04-17
  • 把握和传承好“变则通”思想(大家手笔) 2019-04-17
  • 2015中日韩三国记者联合采访 2019-04-16
  • 计划不是产生在交换基础上的计划。 2019-04-16
  • 张洪忠:人工智能是一种技术迭代,不是对人的替代 2019-04-15
  • “印象”世界杯:揭幕战红色风暴席卷绿茵场 2019-04-15
  • 别克昂科威优惠达3万元 现车较少可试驾 2019-04-15
  • 忆1980年代上海菜场风情 营业员似邻家女孩 2019-04-14
  • 【学习时刻】全国人大代表李扬:总书记重提上海自贸区的世界意义 2019-04-14
  • 颜晓峰:建设新型人民军队的同时要恪守“军魂” 2019-04-14
  • 824| 763| 128| 72| 868| 321| 673| 75| 660| 588|